Cisco SFE1000P Administration Guide - Page 114
Defining Class Mapping
UPC - 745883579754
View all Cisco SFE1000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Chapter SFE1000P Gigabit Ethernet Switch Administration Guide 13 Defining Class Mapping The Class Mapping Page contains parameters for defining class maps. One IP ACL and/or one MAC ACL comprise a class map. Class maps are configured to match packet criteria, and are matched to packets on a first-fit basis. For example, Class Map A is assigned to packets based only on an IP-based ACL or a MAC-based ACL. Class Map B is assigned to packets based on both an IPbased and a MAC-based ACL. 1. Click Quality of Service > Advanced Mode > Class Mapping. The Class Mapping Page opens: Class Mapping Page 2. Click the Add button. The Add QoS Class Map Page opens: Add QoS Class Map Page 3. Define the relevant fields. 4. Click Apply. QoS mapping is added, and the device is updated. Chapter 13: Configuring Quality of Service 106 Defining Advanced Mode