Cisco SFE1000P Administration Guide - Page 120
Modifying QoS Policy Binding Settings, Defining QoS Basic Mode
UPC - 745883579754
View all Cisco SFE1000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter SFE1000P Gigabit Ethernet Switch Administration Guide 13 Modifying QoS Policy Binding Settings 1. Click Quality of Service > Advanced > Policy Binding. The Policy Binding Page opens: 2. Click the Edit button. The Edit QoS Policy Binding Page opens: Edit QoS Policy Binding Page 3. Define the relevant fields. 4. Click Apply. The QoS policy binding is defined, and the device is updated. Defining QoS Basic Mode The Basic Mode Page contains information for enabling Trust on the device. Packets entering a QoS domain are classified at the edge of the QoS domain. 1. Click Quality of Service > Basic Mode. The Basic Mode Page opens: Basic Mode Page In the DSCP Mapping Page, define the Differentiated Services Code Point (DSCP) tag to use in place of the incoming DSCP tags. 2. Click the DSCP Rewrite button. The DSCP Mapping Page opens: Chapter 13: Configuring Quality of Service 112 Defining Advanced Mode