Cisco SFE1000P Administration Guide - Page 53
Defining, LAG Management
UPC - 745883579754
View all Cisco SFE1000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Chapter SFE1000P Gigabit Ethernet Switch Administration Guide 6 Edit Port Settings Page 3. Define the relevant fields. 4. Click Apply. The Port Settings are modified, and the device is updated. Defining LAG Management Link Aggregation optimizes port usage by linking a group of ports together to form a single LAG. Aggregating ports multiplies the bandwidth between the devices, increases port flexibility, and provides link redundancy. The device supports both static LAGs and Link Aggregation Control Protocol (LACP) LAGs. LACP LAGs negotiate aggregating port links with other LACP ports located on a different device. If the other device ports are also LACP ports, the devices establish a LAG between them. Ensure the following: • All ports within a LAG must be the same media type. • A VLAN is not configured on the port. • The port is not assigned to a different LAG. • Auto-negotiation mode is not configured on the port. Chapter 6: Configuring Device Interfaces 45 Defining LAG Management