Cisco SFE1000P Administration Guide - Page 54
Bridging, Port Management, LAG Management., Apply
UPC - 745883579754
View all Cisco SFE1000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter SFE1000P Gigabit Ethernet Switch Administration Guide 6 • The port is in full-duplex mode. • All ports in the LAG have the same ingress filtering and tagged modes. • All ports in the LAG have the same back pressure and flow control modes. • All ports in the LAG have the same priority. • All ports in the LAG have the same transceiver type. • The device supports up to 8 LAGs, and eight ports in each LAG. • Ports can be configured as LACP ports only if the ports are not part of a previously configured LAG. Ports added to a LAG lose their individual port configuration. When ports are removed from the LAG, the original port configuration is applied to the ports. To define LAG management: 1. Click Bridging > Port Management > LAG Management. The LAG Management Page opens: LAG Management Page 2. Define the relevant fields. 3. Click Apply. LAG Management is defined, and the device is updated. Chapter 6: Configuring Device Interfaces 46 Defining LAG Management