Cisco SFE1000P Administration Guide - Page 83
Defining STP Properties
UPC - 745883579754
View all Cisco SFE1000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter SFE1000P Gigabit Ethernet Switch Administration Guide 11 Defining STP Properties The STP Properties Page contains parameters for enabling STP on the device. The STP Properties Page is divided into three areas, Global Settings, Bridge Settings. and Designated Root. 1. Click Bridging > Spanning Tree > Properties. The STP Properties Page opens: STP Properties Page 2. Define the relevant fields. 3. Click Apply. STP is enabled, and the device is updated. Chapter 11: Configuring Spanning Tree 75 Defining STP Properties
75
Chapter 11: Configuring Spanning Tree
Defining STP Properties
SFE1000P Gigabit Ethernet Switch Administration Guide
Chapter
11
Defining STP Properties
The
STP Properties Page
contains parameters for enabling STP on the device. The
STP Properties
Page
is divided into three areas, Global Settings, Bridge Settings. and Designated Root.
1.
Click
Bridging
>
Spanning Tree
>
Properties
. The
STP Properties Page
opens:
STP Properties Page
2.
Define the relevant fields.
3.
Click
Apply
. STP is enabled, and the device is updated.