Cisco SFE1000P Administration Guide - Page 72
Enabling ARP
UPC - 745883579754
View all Cisco SFE1000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Chapter SFE1000P Gigabit Ethernet Switch Administration Guide 8 Enabling ARP The Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical addresses. The ARP table is used to maintain a correlation between each MAC address and its corresponding IP address. The ARP table can be filled in statically by the user. When a static ARP entry is defined, a permanent entry is put in the table, which the system uses to translate IP addresses to MAC addresses. To define ARP: 1. Click System > System Management > IP Addressing > ARP. The ARP Page opens: ARP Page 2. Click on the Add ARP button. The Add ARP Page opens: Add ARP Page 3. Define the relevant fields. 4. Click Apply. The ARP Settings are defined, and the device is updated. Chapter 8: Configuring IP Information 64 Configuring Layer 2IP Addresses