Cisco SPA509G Administration Guide - Page 178

Provisioning Basics Configuration Access Control 6 The User and Admin accounts can be independently password protected. The configuration parameters available to the User account are completely configurable in the Cisco IP phone, on a parameter-by-parameter basis. Optionally, user access to the Cisco IP phone configuration utility can be totally disabled. The Internet domains accessed by the Cisco IP phone for resync, upgrades, and SIP registration for Line 1 can be restricted. Restricting User Access to the Phone Interface Menus (Cisco SPA300 and Cisco SPA500 Series) You can restrict the menus and options that phone users see when they use the phone interface. The Phone-UI-user-mode parameter can be enabled in a provisioning file or in the configuration utility. Specific parameters are then designated as "na" or "ro." Parameters designated as "na" will not appear on the user's phone interface. Parameters designated as "ro" will not be editable by the user. You can set the Phone-UI-user-mode parameter in the configuration utility, but you then need to designate individual parameters as "na" or "ro" using provisioning files. For more information on provisioning, see the Cisco Small Business IP Telephony Devices Provisioning Guide on cisco.com. To change the Phone-UI-user-mode parameter using the web administration interface: STEP 1 Log in to the configuration utility. STEP 2 Click Admin Login and advanced. STEP 3 Click the System tab. STEP 4 In the System Configuration section, in the Phone-UI-user-mode field, choose yes. STEP 5 Click Submit All Changes. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 177