Cisco SPA509G Administration Guide - Page 23
Cisco SPA303, Current IP, Phone Info, Network Status - review
View all Cisco SPA509G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Getting Started Using the Web-Based Configuration Utility 1 • Cisco SPA303, Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco SPA509G: Press the Setup button, then select Network. The Current IP field shows the phone's current IP address. • WIP310: In the Home screen, press Options and highlight Phone Info. Press the Select button. • Cisco SPA525G/525G2: Press the Setup button, then select Status. Select Network Status. The IP address is displayed. STEP 3 Enter the IP address in your web browser address bar. For example: http://192.168.1.8 NOTE If your service provider disabled access to the configuration utility, you must contact the service provider. If you have trouble accessing the configuration utility, perform the following steps: Cisco SPA303, Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco SPA509G STEP 1 Press the Setup button on the phone. STEP 2 Select Network. STEP 3 Scroll to Enable Web Server and make sure that it is set to Yes. If not, press the Edit soft key and press y/n soft key to set it to Yes. STEP 4 Press OK, then press Save. Cisco SPA501G STEP 1 Press the Setup button on the phone. STEP 2 In the IVR menu, enter 7932. STEP 3 Press 1 to enable the web server, then press #. STEP 4 To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 22