Cisco SPA509G Administration Guide - Page 298

Cisco SPA IP Phone Field Reference Phone Tab B Parameter LDAP Display Attrs LDAP Number Mapping Description Format of LDAP results display on phone where: • a-Attribute name • cn-Common name • sn-Surname (last name) • telephoneNumber-Phone number • n-Display name For example, n=Phone will cause "Phone:" to be displayed in front of the phone number of an LDAP query result when the detail soft button is pressed. • t-type When t=p, that is, t is of type phone number, then the retrieved number can be dialed. Only one number can be made dialable. If two numbers are defined as dialable, only the first number is used. For example, a=ipPhone, t=p; a=mobile, t=p; This example results in only the IP Phone number being dialable and the mobile number will be ignored. • p-phone number When p is assigned to a type attribute, example t=p, then the retrieved number will be dialable by the phone. Can be blank if not needed. NOTE With the LDAP number mapping you can manipulate the number that was retrieved from the LDAP server. For example, you can append 9 to the number if your dial plan requires a user to enter 9 before dialing. Add the 9 prefix by adding () to the LDAP Number Mapping field. For example, 555 1212 would become 9555 1212. If you do not manipulate the number in this fashion, a user can use the Edit Dial feature to edit the number before dialing out. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 297