Cisco SPA509G Administration Guide - Page 225

Configuring the Cisco SPA500S Attendant Console Monitoring the Cisco SPA500S 9 Monitoring the Cisco SPA500S To display the status of the Cisco SPA500S, click the Attendant Console Status link on the GUI. The status of each attendant console attached (Unit 1 and Unit 2) is shown. Parameters are read-only. Cisco SPA500S Unit Monitoring Notes The following table describes each parameter; both units display the same parameters. Parameter Unit Enable Subscribe Expires HW Version Unit Online Subscribe Retry Interval SW Version Key Name Type Line Station Subscribe Description Displays if the Unit is enabled or disabled. Displays when the current subscription expires. After the subscription expires, the Cisco SPA500S automatically requests a new subscription. Displays the version of the hardware. Displays whether the unit is connected or not. Displays the length of time the Cisco SPA500S waits to try again if subscription fails. Displays the version of the software currently running on the unit. Displays the name assigned to each key (1-32) on the Cisco SPA500S attendant console unit. Displays the function enabled for each key (1-32) on the Cisco SPA500S attendant console unit. Displays the extension assigned to each key (1-32) on the Cisco SPA500S attendant console unit. Displays the subscribe URI configured for each key (132) on the Cisco SPA500S attendant console unit. Displays the subscription status of the unit/key. The value can be Yes, Fail, or No. No indicates that the feature/function (fnc) of that line does not require a subscription (such as speed dial). Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 224