Cisco WS-C3560E-24PD-E Command Reference - Page 441
show interfaces, transceiver detail
View all Cisco WS-C3560E-24PD-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 441 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show interfaces This is an example of output from the show interfaces interface-id transceiver detail command: Switch# show interfaces gigabitethernet0/3 transceiver detail ITU Channel not available (Wavelength not available), Transceiver is externally calibrated. mA:milliamperes, dBm:decibels (milliwatts), N/A:not applicable. ++:high alarm, +:high warning, -:low warning, -- :low alarm. A2D readouts (if they differ), are reported in parentheses. The threshold values are uncalibrated. Temperature Port (Celsius) Gi0/3 41.5 High Alarm Threshold (Celsius) ---------110.0 High Warn Threshold (Celsius) --------103.0 Low Warn Threshold (Celsius) ---------8.0 Low Alarm Threshold (Celsius) ---------12.0 Port ------Gi0/3 Voltage (Volts 3.20 High Alarm Threshold (Volts) ---------4.00 High Warn Threshold (Volts) --------3.70 Low Warn Threshold (Volts) --------3.00 Low Alarm Threshold (Volts) --------2.95 Port ------Gi0/3 Current (milliamperes 31.0 High Alarm Threshold (mA) ---------84.0 High Warn Threshold (mA) --------70.0 Low Warn Threshold (mA) --------4.0 Low Alarm Threshold (mA) --------2.0 Port ------Gi0/3 Optical Transmit Power (dBm 0.0 ( -0.0) High Alarm Threshold (dBm) ----------0.0 High Warn Threshold (dBm) ---------0.0 Low Warn Threshold (dBm) ---------0.0 Low Alarm Threshold (dBm) ---------0.0 Port ------Gi0/3 Optical Receive Power (dBm N/A ( -0.0) -- High Alarm Threshold (dBm) ----------0.0 High Warn Threshold (dBm) ---------0.0 Low Warn Threshold (dBm) ---------0.0 Low Alarm Threshold (dBm) ---------0.0 78-16405-05 Catalyst 3560 Switch Command Reference 2-409