Cisco WS-C3560E-24PD-E Command Reference - Page 94
cluster outside-interface, Cisco IOS Configuration Fundamentals Command
View all Cisco WS-C3560E-24PD-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
cluster outside-interface Chapter 2 Catalyst 3560 Switch Cisco IOS Commands cluster outside-interface Use the cluster outside-interface global configuration command to configure the outside interface for cluster Network Address Translation (NAT) so that a member without an IP address can communicate with devices outside the cluster. Use the no form of this command to return to the default setting. cluster outside-interface interface-id no cluster outside-interface Syntax Description interface-id Interface to serve as the outside interface. Valid interfaces include physical interfaces, port-channels, or VLANs. The port-channel range is 1 to 48. The VLAN range is 1 to 4094. Defaults The default outside interface is automatically selected by the cluster command switch. Command Modes Global configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines Enter this command only on the cluster command switch. If you enter this command on a cluster member switch, an error message appears. Examples This example shows how to set the outside interface to VLAN 1: Switch(config)# cluster outside-interface vlan 1 You can verify your setting by entering the show running-config privileged EXEC command. Related Commands Command show running-config Description Displays the current operating configuration. For syntax information, select the Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. 2-62 Catalyst 3560 Switch Command Reference 78-16405-05