Cisco WS-C3560E-24PD-E Command Reference - Page 596
spanning-tree bpduguard
View all Cisco WS-C3560E-24PD-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 596 highlights
spanning-tree bpduguard Chapter 2 Catalyst 3560 Switch Cisco IOS Commands spanning-tree bpduguard Use the spanning-tree bpduguard interface configuration command to put an interface in the error-disabled state when it receives a bridge protocol data unit (BPDU). Use the no form of this command to return to the default setting. spanning-tree bpduguard {disable | enable} no spanning-tree bpduguard Syntax Description disable enable Disable BPDU guard on the specified interface. Enable BPDU guard on the specified interface. Defaults BPDU guard is disabled. Command Modes Interface configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines The BPDU guard feature provides a secure response to invalid configurations because you must manually put the interface back in service. Use the BPDU guard feature in a service-provider network to prevent an interface from being included in the spanning-tree topology. You can enable the BPDU guard feature when the switch is operating in the per-VLAN spanning-tree plus (PVST+), rapid-PVST+, or the multiple spanning-tree (MST) mode. You can globally enable BPDU guard on all Port Fast-enabled interfaces by using the spanning-tree portfast bpduguard default global configuration command. You can use the spanning-tree bpduguard interface configuration command to override the setting of the spanning-tree portfast bpduguard default global configuration command. Examples This example shows how to enable the BPDU guard feature on a port: Switch(config)# interface gigabitethernet0/1 Switch(config-if)# spanning-tree bpduguard enable You can verify your setting by entering the show running-config privileged EXEC command. 2-564 Catalyst 3560 Switch Command Reference 78-16405-05