Cisco WS-C3560E-24PD-E Command Reference - Page 485
show lacp
View all Cisco WS-C3560E-24PD-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 485 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands show lacp show lacp Use the show lacp user EXEC command to display Link Aggregation Control Protocol (LACP) channel-group information. show lacp [channel-group-number] {counters | internal | neighbor | sys-id} [ | {begin | exclude | include} expression] Syntax Description channel-group-number counters internal neighbor sys-id | begin | exclude | include expression (Optional) Number of the channel group. The range is 1 to 48. Display traffic information. Display internal information. Display neighbor information. Display the system identifier that is being used by LACP. The system identifier is made up of the LACP system priority and the switch MAC address. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.1(19)EA1 12.2(25)SE Modification This command was introduced. The channel-group-number range was changed from 1 to 12 to 1 to 48. Usage Guidelines You can enter any show lacp command to display the active channel-group information. To display specific channel information, enter the show lacp command with a channel-group number. If you do not specify a channel group, information for all channel groups appears. You can enter the channel-group-number option to specify a channel group for all keywords except sys-id. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. 78-16405-05 Catalyst 3560 Switch Command Reference 2-453