Cisco WS-SUP32-GE-3B Software Configuration Guide - Page 47

3 C H A P T E R Configuring the Switch for the First Time This chapter contains information about how to initially configure the Catalyst 6500 series switch, which supplements the administration information and procedures in these publications: • Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2, at this URL: http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/ffun_c.html • Cisco IOS Configuration Fundamentals Configuration Command Reference, Release 12.2, at this URL: http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/ffun_r.html Note For complete syntax and usage information for the commands used in this chapter, refer to these publications: • The Catalyst Supervisor Engine 32 PISA Cisco IOS Command Reference, Release 12.2ZY, at this URL: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/cmdr ef.html • The Release 12.2 publications at this URL: http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_installation_and_configuratio n_guides_list.html This chapter consists of these sections: • Default Configuration, page 3-1 • Configuring the Switch, page 3-2 • Protecting Access to Privileged EXEC Commands, page 3-14 • Recovering a Lost Enable Password, page 3-18 • Modifying the Supervisor Engine Startup Configuration, page 3-19 Default Configuration Table 3-1 shows the default configuration. OL-11439-03 Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY 3-1