Cisco WS-SUP32-GE-3B Software Configuration Guide - Page 76

Displaying PISA Platform Statistics Chapter 4 Configuring a Supervisor Engine 32 PISA This example shows how to allocate the port ASIC capacity of port 3 to the PISA EtherChannel on a WS-S32-10GE-PISA that is installed in slot 5: Router# configure terminal Router(config)# interface gigabitethernet 5/3 Router(config-if)# channel-group 256 mode on Router(config-if)# end This example shows how to allocate the port ASIC capacity of port 9 to the PISA EtherChannel on a WS-S32-GE-PISA that is installed in slot 5: Router# configure terminal Router(config)# interface gigabitethernet 5/9 Router(config-if)# channel-group 256 mode on Router(config-if)# end Displaying PISA Platform Statistics To display platform statistics for the Supervisor Engine 32 PISA, perform this task: Command Router# show platform pisa np counter-type counters Purpose Displays platform statistics for the Supervisor Engine 32 PISA. • counter-type-See Table 4-1 for the list of valid values. Table 4-1 shows the available counters. Table 4-1 PISA Platform Counters Counter-type me num acl all all pps fpm mqc nbar rx tx Description Microengine information (valid num values are from 0 to 15) ACL counter information All Supervisor Engine 32 PISA-specific counters Packets per second (pps) for all Supervisor Engine 32 PISA-specific counters Flexible packet matching (FPM) counters Modular QoS CLI information Network-based application recognition (NBAR) counter information Receive engine counters Transmit engine counters For examples of the show platform pisa np command output, see the Catalyst Supervisor Engine 32 PISA Cisco IOS Command Reference, Release 12.2ZY, at this URL: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/cmdr ef.html Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY 4-4 OL-11439-03