Coby DVD 925 Instruction Manual - Page 17

COST 4.4., Tuner but ton Number button .Positioning 1.Press TUNER button to select desired wave band (AM or Frvi). 2.Press UP or DOWN button to find a station. The frequency will change with each press. When a station's signal is received, it will appear in the display. 3.To lock on to a station quickly, hold the UP or DOWN button for two seconds. The unit will start automatic tuning. When a station is found, automatic tuning stops. 4.To add a station to memory, press the MEMO button. The memory storage number will blink for four seconds in the display. Press MEMO again to store the station. Memory number 11.5 97:1 Wave band Station frequency 5 To reduce noise when an FM-stereo program has been received, press the FM button. The word STEREO will disappear from the display. The program is now heard in monographic form, reducing the noise. To resume stereo play, press the FM button again. Automatic Tuning This unit will store up to 50 individual AM or 50 individual FM radio stations in its memory. 1.Press the AUTO button. The word AUTO will appear in the display and the automntic tuning mode is activated. 2.Stations will be stored in ascending order until 50 stations of that particular wave band have been saved. When a station is stored, the memory storage number, as well as the station's frequency, will flash for four seconds in the display. 3.When the total number of stations reaches 50, in a particular wave's (AM or FM) memory, no further station in that wave band will be saved. lkions 1,Press the TUNER button to select the desired wave band. 2.Press the PRE/TUN button. 3.Press any of the numbere buttons select the desired station's memory number. For example, to play the station at memory #5, simply press the 5 button; for memory #17. press the 1 button followed by the 7 button. 4.Stations in the memory function may also be accessed by pressing the UP or DOWN button.