Compaq BL20p Installation Guide - Page 94
iLO Switch (SW2), System Switch (SW3), System Configuration Switch (SW1), Table E-4
UPC - 720591771058
View all Compaq BL20p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
LEDs and Switches iLO Switch (SW2) The iLO switch is a four-position switch that grants you access to perform a boot block flash of system ROM and iLO ROM. For the proper system configuration switch settings, refer to Table E-4 or refer to the labels attached to the inside of the server access panel. Table E-4: iLO Switch (SW2) Settings Position 1 2 Description Reserved ILO security override 3 Reserved 4 Reserved On/Off Function - Off = iLO security is enabled; iLO access requires a valid user ID and password. Also, the iLO boot block access is disabled and the iLO boot block cannot be flashed. On = iLO security is disabled; iLO access is possible without a valid user ID or password. Also, the iLO boot block access is enabled and the iLO boot block can be flashed. - - System Switch (SW3) The function for this switch is reserved. CAUTION: Do not change any SW3 settings or the system may not function properly. System Configuration Switch (SW1) The system configuration switch is a four-position switch that enables access to server hardware settings. The default setting for all four positions is off. For the proper system configuration switch settings, refer to Table E-5 or refer to the labels attached to the inside of the server access panel. Compaq ProLiant BL20p Server Blade Setup and Installation Guide E-9