Compaq Evo n600c Maintenance and Service Guide Compaq Evo N600c - Page 101

slide the fan to the left, When the left edge of the fan has cleared the system board

Get Compaq Evo n600c - Notebook PC PDF manuals and user guides View all Compaq Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 101 highlights

Removal and Replacement Procedures 5. Remove the black M1 × 6 Phillips screw 1 and silver M2 × 6.5 Phillips screw 2 that secure the fan to the system board (Figure 5-20). 6. While holding the system board above the work surface, push the left side of the fan up 3 from the bottom of the system board. 7. When the left edge of the fan has cleared the system board, slide the fan to the left 4 and out of the heat sink. Figure 5-20. Removing the Fan 8. Remove the fan. Reverse the above procedure to replace the fan. Maintenance and Service Guide 5-29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
Removal and Replacement Procedures
Maintenance and Service Guide
5
–
29
5. Remove the black M1
×
6 Phillips screw
1
and silver
M2
×
6.5 Phillips screw
2
that secure the fan to the system
board (Figure 5-20).
6.
While holding the system board above the work surface, push
the left side of the fan up
3
from the bottom of the system
board.
7. When the left edge of the fan has cleared the system board,
slide the fan to the left
4
and out of the heat sink.
Figure 5-20. Removing the Fan
8. Remove the fan.
Reverse the above procedure to replace the fan.