Compaq Evo n600c Maintenance and Service Guide Compaq Evo N600c - Page 98
Removing the System Board, Slide the system board out of the base enclosure at
View all Compaq Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Removal and Replacement Procedures 6. Use the MultiBay connector 1 to lift the system board and swing it up and to the right until it rests at a 45-degree angle (Figure 5-18). 7. Slide the system board out of the base enclosure at a 45-degree angle 2. Figure 5-18. Removing the System Board Reverse the above procedure to replace the system board. 5-26 Maintenance and Service Guide
5
–
26
Maintenance and Service Guide
Removal and Replacement Procedures
6. Use the MultiBay connector
1
to lift the system board and
swing it up and to the right until it rests at a 45-degree angle
(Figure 5-18).
7. Slide the system board out of the base enclosure at a
45-degree angle
2
.
Figure 5-18. Removing the System Board
Reverse the above procedure to replace the system board.