Compaq Evo n600c Maintenance and Service Guide Compaq Evo N600c - Page 93
Removing the Top Cover Screws, screws from the hard drive bay
View all Compaq Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Removal and Replacement Procedures 3. Remove the following screws: ❏ three black M2 × 7 screws from the front edge of the base enclosure 1 (Figure 5-14) ❏ two black M2 × 5 screws from the hard drive bay 2 ❏ three black M2 × 5 screws from the MultiBay 3 ❏ two black M2 × 5 screws from the rear panel 4 Figure 5-14. Removing the Top Cover Screws 4. Turn the computer top side up with the rear panel facing you. Maintenance and Service Guide 5-21
Removal and Replacement Procedures
Maintenance and Service Guide
5
–
21
3. Remove the following screws:
❏
three black M2
×
7 screws from the front edge of the base
enclosure
1
(Figure 5-14)
❏
two black M2
×
5 screws from the hard drive bay
2
❏
three black M2
×
5 screws from the MultiBay
3
❏
two black M2
×
5 screws from the rear panel
4
Figure 5-14. Removing the Top Cover Screws
4. Turn the computer top side up with the rear panel facing you.