Compaq Evo n600c Maintenance and Service Guide Compaq Evo N600c - Page 97
Do Not Remove These Screws, that secure the heat sink to the system
View all Compaq Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Removal and Replacement Procedures ✎ When removing the system board, do not remove the following screws (Figure 5-17): I four screws 1 that secure the processor bracket to the system board I two screws 2 that secure the heat sink to the system board I two screws 3 that secure the hard drive connector the system board I four screws 4 that secure the PC Card assembly to the system board Figure 5-17. Do Not Remove These Screws Maintenance and Service Guide 5-25
Removal and Replacement Procedures
Maintenance and Service Guide
5
–
25
✎
When removing the system board, do not remove the following
screws (Figure 5-17):
■
four screws
1
that secure the processor bracket to the
system board
■
two screws
2
that secure the heat sink to the system
board
■
two screws
3
that secure the hard drive connector the
system board
■
four screws
4
that secure the PC Card assembly to the
system board
Figure 5-17. Do Not Remove These Screws