Compaq Presario 17XL Presario NA1700XL Series Maintenance and Service Guide - Page 55

Presario 1700 Series Models: XL260, XL261, XL262, XL264, XL265, XL266, XL274, XL275, XL360, XL361, XL362, XL363, XL364, XL365, XL366, XL367, XL368, XL369, XL370, XL371, XL372, XL373, XL374, XL375, XL376, XL377, and XL378 Error Code 101-xx 102-xx 103-xx 104-xx 105-xx 106-xx 107-xx 108-xx 109-xx 110-xx 113-xx 114-01 200-xx 202-xx 203-xx 204-xx 211-xx 214-xx 215-xx Processor Test Error Codes Description CPU test failed Coprocessor or Weitek Error DMA page registers test failed Interrupt controller master test failed Port 61 error Keyboard controller self-test failed CMOS RAM test failed CMOS interrupt test failed CMOS clock test failed Programmable timer load data test failed Protected mode test failed Speaker test failed Memory machine ID test failed Memory system ROM checksum failed Write/Read test failed Address test failed Random pattern test failed Noise test failed Random address test failed Recommended Action Replace the processor and retest. 1. Run the Configuration and Diagnostics Utilities. 2. Replace the processor board and retest. The following applies to error codes 103-xx through 114-01: Replace the system board and retest. 1. Check system configuration. 2. Verify cable connections to speaker. 3. Replace the system board and retest. The following steps apply to error codes 200-xx and 202-xx: 1. Flash the system ROM and retest. 2. Replace the system board and retest. The following steps apply to error codes 203-xx through 215-xx: 1. Remove the memory module and retest. 2. Install a new memory module and retest.