Compaq Presario 17XL Presario NA1700XL Series Maintenance and Service Guide - Page 99
Modem/NIC Combo Card, Preparing for Modem/NIC Combo Card Removal, Removing the Modem/NIC Combo Card
View all Compaq Presario 17XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Presario 1700 Series Models: XL260, XL261, XL262, XL264, XL265, XL266, XL274, XL275, XL360, XL361, XL362, XL363, XL364, XL365, XL366, XL367, XL368, XL369, XL370, XL371, XL372, XL373, XL374, XL375, XL376, XL377, and XL378 Modem/NIC Combo Card Preparing for Modem/NIC Combo Card Removal Prepare the unit for disassembly (pg 7), and remove the following before removing the modem/NIC combo card: 1. Remove the LED button bezel (pg 12). 2. Remove the keyboard (pg 14). 3. Remove the Heatspreader (pg 15). 4. Remove the Heatsink assembly (pg 16). 5. Remove the keyboard cable connection (pg 19). Removing the Modem/NIC Combo Card To remove the modem/NIC combo card, complete the following steps: 1. Gently pry open the ZIF connector by carefully lifting on the left side, then the right side, until you can lift no further. 2. Grasp the cable and GENTLY pull up from connector. Ä CAUTION: To prevent damage to the system board, do not pry and lift with excessive force. You may otherwise have to replace the system board.