Compaq ProLiant 1200 ProLiant Server Troubleshooting Guide - Page 208
Series POST Error Messages, Replace the CD
View all Compaq ProLiant 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
POST Error Messages 600 Series POST Error Messages Table C-8: 600 Series POST Error Messages Error Code 601-Diskette Controller Failed Audible Beeps None Probable Source of Problem Diskette-controller circuitry failure occurred. 601-Diskette Controller Error None Diskette-controller circuitry failure occurred. 601-Diskette Controller Error The drive is not installed correctly or has failed. Make sure that power and drive cables are connected, both to the drive and the system board. Also verify that the cables are the correct cables for your computer model. If this message persists, you may need service for your PC. None CD-ROM/diskette drive assembly is not seated correctly. A controller circuitry failure occurred. Action 1. Be sure the diskette drive cables are connected. 2. Replace the diskette drive, the cable, or both. 3. Research and replace failed assembly as indicated. 1. Be sure that the diskette drive cables are connected. 2. Replace the diskette drive, the cable, or both. 3. Research and replace failed assembly as indicated. 1. Be sure that the CD-ROM/diskette drive assembly is properly inserted. 2. Be sure that the cables are connected to the backplane. 3. Replace the CDROM/diskette drive assembly, or the cable, or the backplane, or all three. 4. Research and replace failed assembly as instructed. continued C-28 HP Servers Troubleshooting Guide