Compaq ProLiant 1200 ProLiant Server Troubleshooting Guide - Page 249
Write Error or Self, Select F1
View all Compaq ProLiant 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
POST Error Messages Table C-13: 1700 Series POST Error Messages continued Error Code Audible Beeps Probable Source of Problem 1797-Drive Array - Array Accelerator Read Error Occurred. Data in Array Accelerator has been lost. Array Accelerator is disabled. None Hard parity error detected while reading data from posted-writes memory. 1798-Drive Array - Array Accelerator Write Error or SelfTest Error Occurred. Array Accelerator is disabled. None Array accelerator failed self-test. Depending on the array controller model, the cache may be disabled or the controller might not be usable at all until this problem is corrected. 1799-Drive Array - Drive(s) Disabled due to Array Accelerator Data Loss. Select "F1" to continue with logical drives disabled. Select "F2" to accept data loss and to re-enable logical drives. None Logical drive(s) failed due to loss of data in posted-writes memory. Action Replace array accelerator daughter board. Replace array accelerator daughter board. Press the F1 key to continue with logical drive(s) disabled or the F2 key to accept data loss and re-enable logical drive(s). After pressing the F2 key, check integrity of file system and restore lost data from backup. HP Servers Troubleshooting Guide C-69