Compaq ProLiant 1200 ProLiant Server Troubleshooting Guide - Page 57
Table 2-5, Processor Problems, Problem, Possible Cause, Possible Solution
View all Compaq ProLiant 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Hardware Problems Table 2-5: Processor Problems continued Problem Possible Cause Processor problems are occurring (continued). Server has multiple processors installed, and one or more processors are faulty. Possible Solution 1. Remove all processors but one from the server, replacing them with processor terminator boards or blanks, if applicable to your server. 2. If your server includes Processor Power Modules (PPMs) that are not integrated on the system board, remove all PPMs from the server except for the PPM associated with the remaining processor. 3. Replace the remaining processor with a known functional processor. If the problem is resolved after you restart the server, one or more of the original processors are at fault. Add each processor and its associated PPM (if applicable) back to the server one by one, restarting each time, to find the faulty processor or processors. Be sure that the processor configurations at each step are compatible with your server requirements. continued HP Servers Troubleshooting Guide 2-15