Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 42
Processor and Memory Module, Shipping Screw
![]() |
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Removal and Replacement Procedures 2-19 Processor and Memory Module Shipping Screw To loosen the shipping screw: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Open the top access panel. See "Top Access Panel" earlier in this chapter. 3. Lift up the fan intake plenum . 4. Loosen the thumbscrew . 2 1 Figure 2-13. Loosening the shipping screw To tighten the shipping screw, repeat steps 1 through 3 and tighten the screw.
![](/manual_guide/products/compaq-proliant-8500-proliant-8500-servers-maintenance-service-guide-968a3c9/42.png)
Removal and Replacement Procedures
2-19
Processor and Memory Module
Shipping Screw
To loosen the shipping screw:
1.
Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2.
Open the top access panel. See
“
Top Access Panel
”
earlier in this chapter.
3.
Lift up the fan intake plenum
.
4.
Loosen the thumbscrew
.
1
2
Figure 2-13.
Loosening the shipping screw
To tighten the shipping screw, repeat steps 1 through 3 and tighten the screw.