Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 95
Check PCI Hot-Plug, Bus Detected. Verify
![]() |
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Diagnostic Tools 3-17 Table 3-2 POST Error Messages continued Error Code Audible Beeps 1615-Power supply None configuration error 1617-Fan controller not responding. System halted. 1617-I/O Fan controller not responding. System halted. 1617-CPU Fan controller not responding. System halted. 1618-PCI slots powered down. Check PCI Hot-Plug enabler connectors. 1620-Locked SCSI Bus Detected. Verify SCSI bus cabling. System halted. 1621-Current SCSI bus cable configuration is not recommended 1622-Internal SCSI Jumper Board Not Installed 1702-SCSI Cable Error Detected 2 short 2 short 2 short None None None None None Probable Source of Problem Your configuration requires an additional power supply. A moving bar will display, indicating that the system is waiting for another power supply to be installed. Fan controller failure detected. Recommended Action Install the additional power supply. Check and replace failed controller assembly. I/O fan controller failure detected. Check and replace failed controller assembly. CPU fan controller failure detected. Check and replace failed controller assembly. PCI Hot Plug enabler is missing or failed. Check and replace missing or failed assembly. SCSI bus failure detected. Improper SCSI bus cabling detected. Ensure that the integrated SCSI controller has SCSI termination attached. Check documentation for proper SCSI bus cabling. The system has detected that the array enabler board is not installed. SCSI cable has failed. Install the array enabler board. 1. Reseat the SCSI cable on the controller and all attached devices. 2. Check the SCSI cable at all connectors for bent pins. 3. Replace SCSI cable. continued
![](/manual_guide/products/compaq-proliant-8500-proliant-8500-servers-maintenance-service-guide-968a3c9/95.png)