Compaq ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 55
Cache Accelerators
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
2-32 Compaq ProLiant 8500 Server Maintenance and Service Guide Cache Accelerators IMPORTANT: Cache accelerators must be installed when processors are installed on both buses. To remove a cache accelerator: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the processor and memory module. See "Opening and Removing the Processor and Memory Module" earlier in this chapter. 3. Loosen the thumbscrew of the middle air baffle and lift the baffle upward to allow access to the cache accelerator. See "Middle Air Baffle" earlier in this chapter. 4. Locate the cache accelerator. 5. Push down on the release lever on the side of the cache accelerator slot . 6. Remove the cache accelerator . 1 2 Figure 2-24. Removing a cache accelerator Reverse steps 1 through 6 to replace the cache accelerator. NOTE: Cache accelerator modules are keyed to ensure correct alignment.