Compaq nc8000 HP Compaq nc8000 Business PC, HP Compaq nw8000 Mobile Workstatio - Page 118
and slide it to the, Lift up on the left side of the shield
View all Compaq nc8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Removal and Replacement Procedures ✎ Some computer models have two Torx7 with pin security screws (M2.0×4.0) securing the Mini PCI communications board to the computer. A T7 pin bit screw driver is required to remove the Mini PCI communications board on these computer models. 3. Remove the two T8M2.0×4.0 screws 1 that secure the Mini PCI communications board shield to the notebook. 4. Lift up on the left side of the shield 2 and slide it to the left 3 to remove it. ✎ The Mini PCI communications board shield is included in the Miscellaneous Plastics Kit, spare part number 345066-001. Removing the Mini PCI Communications Board Shield Maintenance and Service Guide 5-25
Removal and Replacement Procedures
Maintenance and Service Guide
5–25
✎
Some computer models have two Torx7 with pin security screws
(M2.0×4.0) securing the Mini PCI communications board to the
computer. A T7 pin bit screw driver is required to remove the
Mini PCI communications board on these computer models.
3. Remove the two T8M2.0×4.0 screws
1
that secure the Mini
PCI communications board shield to the notebook.
4. Lift up on the left side of the shield
2
and slide it to the
left
3
to remove it.
✎
The Mini PCI communications board shield is included in the
Miscellaneous Plastics Kit, spare part number 345066-001.
Removing the Mini PCI Communications Board Shield