Compaq nc8000 HP Compaq nc8000 Business PC, HP Compaq nw8000 Mobile Workstatio - Page 136
Remove the TouchPad, attached and disconnect the cable
View all Compaq nc8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Removal and Replacement Procedures 4. Remove the bracket. 5. Remove the TouchPad 1 from the top cover. 6. Release the ZIF connector 2 to which the TouchPad cable is attached and disconnect the cable 3. Removing the TouchPad Reverse the above procedure to install the TouchPad and bracket. Maintenance and Service Guide 5-43
Removal and Replacement Procedures
Maintenance and Service Guide
5–43
4. Remove the bracket.
5. Remove the TouchPad
1
from the top cover.
6. Release the ZIF connector
2
to which the TouchPad cable is
attached and disconnect the cable
3
.
Removing the TouchPad
Reverse the above procedure to install the TouchPad and bracket.