Compaq nc8000 HP Compaq nc8000 Business PC, HP Compaq nw8000 Mobile Workstatio - Page 119
Pull the board away from the socket at a 45-degree angle, Remove the Mini PCI communications board.
View all Compaq nc8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Removal and Replacement Procedures 5. Disconnect the two antenna cables 1 from the board. Make note of which cable connects to which terminal. 6. Spread the retaining tabs 2 that secure the Mini PCI communications board to the socket. The free end of the board rises. 7. Pull the board away from the socket at a 45-degree angle 3. Removing the Mini PCI Communications Board 8. Remove the Mini PCI communications board. Reverse the above procedure to install the Mini PCI communications board. 5-26 Maintenance and Service Guide
5–26
Maintenance and Service Guide
Removal and Replacement Procedures
5. Disconnect the two antenna cables
1
from the board.
Make note of which cable connects to which terminal.
6. Spread the retaining tabs
2
that secure the Mini PCI
communications board to the socket. The free end of the
board rises.
7. Pull the board away from the socket at a 45-degree angle
3
.
Removing the Mini PCI Communications Board
8. Remove the Mini PCI communications board.
Reverse the above procedure to install the Mini PCI
communications board.