Compaq nc8000 HP Compaq nc8000 Business PC, HP Compaq nw8000 Mobile Workstatio - Page 133
system board., Remove the top cover.
View all Compaq nc8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Removal and Replacement Procedures 10. Disconnect the speaker 1 and microphone cables 2. 11. Release the ZIF connector 3 to which the TouchPad cable is attached and disconnect the TouchPad cable 4 from the system board. Disconnecting the Top Cover Cables 12. Remove the top cover. Reverse the above procedure to install the top cover. 5-40 Maintenance and Service Guide
5–40
Maintenance and Service Guide
Removal and Replacement Procedures
10. Disconnect the speaker
1
and microphone cables
2
.
11. Release the ZIF connector
3
to which the TouchPad cable is
attached and disconnect the TouchPad cable
4
from the
system board.
Disconnecting the Top Cover Cables
12. Remove the top cover.
Reverse the above procedure to install the top cover.