Compaq nc8000 HP Compaq nc8000 Business PC, HP Compaq nw8000 Mobile Workstatio - Page 135
TouchPad, Remove the three Torx T8M2.0×3.5 screws
View all Compaq nc8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Removal and Replacement Procedures 5.21 TouchPad ✎ The TouchPad and bracket are included with the top cover, spare part number 345061-001. 1. Prepare the notebook for disassembly (refer to Section 5.3) and remove the following components: ❏ Keyboard (refer to Section 5.9) ❏ LED switch cover (refer to Section 5.15) ❏ Display assembly (refer to Section 5.18) ❏ Top cover (refer to Section 5.19) ❏ Speaker (refer to Section 5.20) 2. Remove the three Torx T8M2.0×3.5 screws 1 that secure the TouchPad and bracket to the top cover. 3. Lift the left side of the bracket 2, then slide the bracket to the left. Removing the TouchPad Bracket 5-42 Maintenance and Service Guide
5–42
Maintenance and Service Guide
Removal and Replacement Procedures
5.21 TouchPad
✎
The TouchPad and bracket are included with the top cover, spare
part number 345061-001.
1. Prepare the notebook for disassembly (refer to
Section 5.3
)
and remove the following components:
❏
Keyboard (refer to
Section 5.9
)
❏
LED switch cover (refer to
Section 5.15
)
❏
Display assembly (refer to
Section 5.18
)
❏
Top cover (refer to
Section 5.19
)
❏
Speaker (refer to
Section 5.20
)
2. Remove the three Torx T8M2.0×3.5 screws
1
that secure
the TouchPad and bracket to the top cover.
3. Lift the left side of the bracket
2
, then slide the bracket to
the left.
Removing the TouchPad Bracket