Compaq nc8000 HP Compaq nc8000 Business PC, HP Compaq nw8000 Mobile Workstatio - Page 123
in the front left corner when you install the processor.
View all Compaq nc8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Removal and Replacement Procedures 4. Use a flat-bladed screwdriver to turn the processor locking screw one-quarter turn counterclockwise 1. 5. Remove the processor from the system board socket 2. ✎ Note that the gold triangle 3 on the processor should be aligned in the front left corner when you install the processor. Removing the Processor Reverse the above procedure to install the processor. 5-30 Maintenance and Service Guide
5–30
Maintenance and Service Guide
Removal and Replacement Procedures
4. Use a flat-bladed screwdriver to turn the processor locking
screw one-quarter turn counterclockwise
1
.
5. Remove the processor from the system board socket
2
.
✎
Note that the gold triangle
3
on the processor should be aligned
in the front left corner when you install the processor.
Removing the Processor
Reverse the above procedure to install the processor.