Cub Cadet LTX 1045 Operation Manual - Page 21

Lubrication - park brake repair

Get Cub Cadet LTX 1045 PDF manuals and user guides View all Cub Cadet LTX 1045 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

4. Attach the hose coupler to the water port on your deck's surface. See Fig. 6-2. Lubrication inspecting, always disengage PTO, set parking _ braAkRe,NIsNtoGp! enBgeinfoere anludbrirceamtionvge, kreeypatoirinpgr,eveonrt unintended starting. FrontWheels Each of the front wheel axles and rims is equipped with a grease fitting. See Fig. 6-3. Lubricate with a No. 2 multi-purpose grease applied with a grease gun after every 25 hours of tractor operation. Figure 6-2 5. Turn the water on. 6. While sitting in the operator's position on the tractor, start the engine and place the throttle lever in the FAST (rabbit) position. 7. Move the tractor's PTO (Blade Engage) into the ON position. 8. Remain in the operator's position with the cutting deck engaged for a minimum of two minutes, allowing the underside of the cutting deck to thoroughly rinse. 9. Move the tractor's PTO (Blade Engage) into the OFF position. 10. Turn the ignition key to the STOP position to turn the tractor's engine off. 11. Turn the water off and detach the hose coupler from the water port on your deck's surface. After cleaning your deck with the Smart Jet system, return to the operator's position and engage the PTO. Keep the cutting deck running for a minimum of two minutes, allowing the underside of the cutting deck to thoroughly dry. Figure 6-3 Pivot Points & Linkage Lubricate all the pivot points on the drive system, parking brake and lift linkage at least once a season with light oil. DeckWheels Each of the tractor deck's front gauge wheels is equipped with a grease fitting. Lubricate with a No. 2 multi-purpose grease applied with a grease gun after every 25 hours of tractor operation. SECTION 6 -- MAINTENANCE & ADJUSTMENTS 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
4.
Attach
the
hose coupler
to the water
port
on your
deck's
surface.
See Fig. 6-2.
Figure
6-2
5.
6.
Turn the water
on.
While
sitting
in the
operator's
position
on the tractor,
start
the engine
and place
the
throttle
lever in the FAST (rabbit)
position.
7.
Move
the tractor's
PTO (Blade
Engage)
into the
ON position.
8.
Remain
in the
operator's
position
with
the cutting
deck
engaged
for a minimum
of two
minutes,
allowing
the
underside
of the
cutting
deck
to thoroughly
rinse.
9.
Move
the tractor's
PTO (Blade Engage)
into
the OFF
position.
10.
Turn the ignition
key to the
STOP position
to turn
the
tractor's
engine
off.
11.
Turn the water
off and
detach
the
hose coupler
from
the
water
port
on your
deck's
surface.
After
cleaning
your
deck
with
the Smart
Jet system,
return
to the
operator's
position
and
engage
the
PTO. Keep the
cutting
deck
running
for a minimum
of two
minutes,
allowing
the
underside
of the
cutting
deck
to thoroughly
dry.
Lubrication
_
ARNING!
Before
lubricating,
repairing,
or
inspecting,
always
disengage
PTO, set parking
brake, stop
engine
and
remove
key to prevent
unintended
starting.
Front
Wheels
Each of the
front
wheel
axles and
rims is equipped
with
a
grease
fitting.
See Fig. 6-3. Lubricate
with
a No. 2 multi-purpose
grease
applied
with
a grease gun
after
every 25 hours
of tractor
operation.
Figure
6-3
Pivot Points & Linkage
Lubricate
all the
pivot
points
on the
drive
system,
parking
brake
and
lift linkage
at least
once a season with
light
oil.
DeckWheels
Each of the
tractor
deck's
front
gauge
wheels
is equipped
with
a grease
fitting.
Lubricate
with
a No. 2 multi-purpose
grease
applied
with
a grease
gun after
every
25 hours
of tractor
operation.
SECTION
6
--
MAINTENANCE
&
ADJUSTMENTS
21