D-Link DAP-1525 Product Manual - Page 12
AP/Bridge, AP Mode - install
View all D-Link DAP-1525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Section 2 - Installation AP/Bridge Depending on how you want to use your DAP-1525 will determine which mode you use. This section will help you figure out which setting works with your setup. AP Mode If you already have a wired or wireless router, and want to add a MediaBand (5GHz wireless), to your network, you will need to move the switch on the back panel of the DAP-1525 to "AP 5GHz". 1. Ensure you have a broadband Internet connector such as a cable or DSL client line that connects the 2. Internet to your home or office. 3. Connect the cable properly or install the modem. 4. Connect the cable or modem with the broadband Access Point. 5. Connect the DAP-1525's Ethernet port to your LAN. 6. Move the switch to wireless 2.4GHz AP, or 5GHz AP Mode. 7. Connect your PC or notebook to the DAP-1525 using the PC or notebook's wireless adapter. D-Link DAP-1525 User Manual 12