D-Link DAP-1525 Product Manual - Page 22
Manual Configuration, Wireless Settings - same ssid
View all D-Link DAP-1525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Section 3 - Configuration Manual Configuration Wireless Settings Wireless Band: Displays the band you are using. Enable Wireless: Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. Wireless When you are browsing for available wireless networks, Network Name: this is the name that will appear in the list (unless Visibility Status is set to Invisible, see below). This name is also referred to as the SSID. For security purposes, it is highly recommended to change from the pre-configured network name. Enable Auto The Auto Channel Scan setting can be selected to allow Channel Scan: the DAP-1525 to choose the channel with the least amount of interference. Wireless Indicates the channel setting for the DAP-1525. The Channel: Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out. Transmission Select the transmit rate. It is strongly suggested to select Rate: Best (automatic) for best performance. Wireless Mode: The current wireless mode is set to Access Point, it will create a wireless infrastructure network. Band Width: Select the Band Width: Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices. 20MHz - Select if you are not using any 802.11n wireless clients. D-Link DAP-1525 User Manual 22