D-Link DAP-1525 Product Manual - Page 66
Con WPA-Personal (AP Mode
View all D-Link DAP-1525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Section 4 - Security Configure WPA-Personal (AP Mode) It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the access point (192.168.0.50). Click on Setup and then click Wireless Settings on the left side. 2. Select Enable WPA/WPA2 Wireless Security (enhanced) from the Security Mode drop-down menu. 3. Select Auto(TKIP/AES), TKIP, or AES from the Cipher Type dropdown menu. If you have wireless clients that use both types, use TKIP/AES. 5. Select either PSK or EAP from the drop-down menu. 6. Enter your Network key in the Network Key section. The key is entered as a pass-phrase in either ASCII or HEX format. If using ASCII format the pass-phrase must be between 8-63 characters. If using HEX format the pass-phrase must be 64 characters. The ASCII or HEX pass-phrase must be the same at both ends of the wireless connection. 7. Click on Enable to enable the Wi-Fi Protected Setup. 8. Click Save Settings at the top of the window to save your settings. D-Link DAP-1525 User Manual 66