D-Link DES-3828 Product Manual - Page 170
Command List History, CTRL+C ESC q Quit SPACE n Next ENTER Next
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual 21 COMMAND LIST HISTORY The switch history commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command ? dir config command_history show command_history Parameters {} Each command is listed, in detail, in the following sections. ? Purpose Syntax Description Parameters Restrictions Used to display all commands in the Command Line Interface (CLI). ? {} This command will display all of the commands available through the Command Line Interface (CLI). {} - Entering the question mark with an appropriate command will list all the corresponding parameters for the specified command, along with a brief description of the commands function and similar commands having the same words in the command. None. Example usage: To display all of the commands in the CLI: DES-3800:admin#? .. ? clear clear arptable clear counters clear fdb clear log clear port_security_entry port config 802.1p default_priority config 802.1p user_priority config 802.1x auth_mode config 802.1x auth_parameter ports config 802.1x capability ports config 802.1x guest_vlan config 802.1x guest_vlan ports config 802.1x init config 802.1x reauth config access_profile profile_id config account config address_binding ip_mac ipaddress config address_binding ip_mac ports config admin local_enable CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All 166