D-Link DES-3828 Product Manual - Page 52

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show poe system Purpose Syntax Description Parameters Restrictions Used to display the setting and actual values of the whole PoE system. show poe system {}] Display the settings and actual values of the whole PoE system. None. None. Example usage: To display the power settings for the switch system: DES-3800:admin#show poe system Command: show poe system PoE System Information Power Limit : 300 (watts) Power Consumption : 0 (watts) Power Remained : 300 (watts) Power Disconnection Method : deny next port If Power remained is less than 19 watts(Power Guard Band) and Power Disconnection Method is set to deny next port, then no additional port will be connected. DES-3800:admin# show poe ports Purpose Syntax Description Parameters Used to display the settings and the actual values of the PoE ports. show poe ports {} Display the settings, actual values and port configuration of the whole PoE system. - Enter a port or range of ports to be display their PoE settings. Restrictions None. Example usage: To display the power settings for the switch's ports DES-3800:admin#show poe ports Command: show poe ports Port State Priority Power Limit(mW) Class Power(mW) Voltage(decivolt) Current (mA) Status 1 Enabled Critical 12000(User-defined) 0 0 0 0 OFF : Non-standard PD connected 2 Enabled Critical 12000(User-defined) OFF : Interim state during line detection 3 Enabled Critical 12000(User-defined) OFF : Interim state during line detection 4 Enabled Low 15400(User-defined) 48