D-Link DES-3828 Product Manual - Page 348

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual 49 MODIFY PROMPT AND BANNER COMMANDS The Modify Prompt and Banner commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config command_prompt config greeting_message show greeting_message Parameters [ | username | default] {default} config command_prompt Purpose Syntax Description Parameters Restrictions Used to configure the command prompt for the Command Line Interface. config command_prompt [ | username | default] This command is used to configure the command prompt for the CLI interface of the Switch. The current command prompt consists of "product name + : + user level + product name" (ex. DES-3800:admin#). The user may replace all parts of the command prompt, except the # by entering a string of 16 alphanumerical characters with no spaces, or the user may enter the current login username configured on the Switch. - Enter an alphanumeric string of no more than 16 characters to define the command prompt for the CLI interface. username - Entering this parameter will replace the current CLI command prompt with the login username configured on the Switch. default - Entering this parameter will return the command prompt to its original factory default setting. The reset command will not alter the configured command prompt, yet the reset system command will return the command prompt to its original factory default setting. Only Administrator or Operator-level users can issue this command. Example usage: To configure the command prompt: DES-3800:admin#config command prompt Trinity Command: config command prompt Trinity Success. DES-3800:admin# 344