D-Link DES-3828 Product Manual - Page 70

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual disable autoconfig Purpose Syntax Description Parameters Restrictions Use this to deactivate autoconfiguration from DHCP. disable autoconfig This instructs the Switch not to accept autoconfiguration instruction from the DHCP server. This does not change the IP settings of the Switch. The ipif settings will continue as DHCP client until changed with the config ipif command. None. Only Administrator or Operator-level users can issue this command. Example usage: To stop the autoconfiguration function: DES-3800:admin#disable autoconfig Command: disable autoconfig Success. DES-3800:admin# show autoconfig Purpose Syntax Description Parameters Restrictions Used to display the current autoconfig status of the Switch. show autoconfig This will list the current status of the autoconfiguration function. None. Only Administrator or Operator-level users can issue this command. Example usage: To upload an autoconfiguration-: DES-3800:admin#show autoconfig Command: show autoconfig Autoconfig disabled. Success. DES-3800:admin# ping Purpose Syntax Description Parameters Used to test the connectivity between network devices. ping {times } {timeout } The ping command sends Internet Control Message Protocol (ICMP) echo messages to a remote IP address. The remote IP address will then "echo" or return the message. This is used to confirm connectivity between the Switch and the remote device. - Specifies the IP address of the host. 66