Home » D-Link Manuals » Hubs & Switches » D-Link DES-3828 » Manual Viewer

D-Link DES-3828 Product Manual - Page 418

enable/disable dhcp_server, show dhcp_server, NetBIOS Node Type

UPC - 790069276811

Add to My Manuals
Save this manual to your list of manuals

Page 418 highlights

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin#show dhcp pool engineering Command: show dhcp pool engineering Pool Name : engineering Network Address : 10.10.10.0/24 Domain Name : alpha.com DNS Server : 10.10.10.1 NetBIOS Name Server : 10.10.10.1 NetBIOS Node Type : broadcast Default Router : 10.10.10.1 Pool Lease : 10 days, 0 hours, 0 minutes Boot File : boot.bin Next Server : 10.10.10.2 DES-3800:admin# enable/disable dhcp_server Purpose Syntax Description Parameters Restrictions This command enables or disables the DHCP server function. enable dhcp_server disable dhcp_server This command is used to enable or disable the DHCP server function on the Switch. If DHCP relay is enabled, DHCP server can not be enabled. The opposite is also true. None. Only Administrator or Operator-level users can issue this command. Usage Example: To enable dhcp server. DES-3800:admin#enable dhcp_server Command: enable dhcp_server Success. DES-3800:admin# show dhcp_server Purpose Syntax Description Parameters Restrictions This command displays the status of DHCP server. show dhcp server This command will display the current DHCP server on the switch. None. None. Usage Example: To display the dhcp server settings. 414

Section	Page
INTRODUCTION	5
Using the Console CLI	7
Command Syntax	11
Basic Switch Commands	13
Switch Port Commands	31
SNMP V3	35
PoE Commands	49
Network Management Commands	54
Switch Utility Commands	62
Network Monitoring Commands	73
Layer 2 FDB Commands	86
Packet Storm Control Commands	94
QoS Commands	98
Mirror Configuration Commands	106
VLAN Commands	109
Link Aggregation Commands	123
IGMP Snooping Commands	127
802.1X Commands (Including Guest VLANs)	135
Access Control List (ACL) Commands	148
Traffic Segmentation Commands	168
Command List History	170
Basic IP Commands (For Layer 3)	173
ARP Commands	178
Routing Table Commands	182
Route Redistribution Commands	185
RIP Commands	191
IGMP Commands	195
Auto Config Commands V3	199
DNS Relay Commands	201
DVMRP Commands	205
IP Multicasting Commands	210
MD5 Commands	213
OSPF Configuration Commands	215
Time and SNTP Commands	232
Port Security Commands	238
MAC Notification Commands	242
SSH Commands	246
Jumbo Frame Commands	254
Access Authentication Control Commands	256
D-Link Single IP Management Commands	279
Multiple Spanning Tree Protocol (MSTP) Commands	289
SSL Commands	301
VRRP Commands	307
System Severity	316
DHCP Relay	318
IP-MAC Binding Commands	324
LACP Configuration Commands	338
CPU Interface Filtering (Software ACL) Commands	340
Modify Prompt and Banner Commands	348
Safeguard Engine	351
WRED Command List	353
Web-based Access Control (WAC) Commands	357
Double VLAN Command List	363
Limited Multicast IP Address Commands	368
Route Preference Commands	373
MAC-Based Access Control Commands	376
PIM Commands	385
Loopback Interface Commands	402
DHCP Server Command List	405
MLD Snooping Commands	421
Loopback Detection Commands	428
Password Recovery Commands	433
Multicast VLAN Commands	436
CPU Filtering Commands List	439
Broadcast Segmentation Commands	441
Technical Specifications	443