D-Link DGS-3630 Emulator 1 - Page 1178

Parameters DGS-3630 Layer 3 Stackable Managed Switch CLI Reference Guide trap-rate TRAP-RATE (Optional) Specifies the number of traps to send per second. The range is from 0 to 1000. The default value of 31 indicates that an SNMP trap is to be generated for every security violation. Default By default, this feature is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is used to enable or disable the sending of SNMP notifications for port security address violations. Example This example shows how to enable the sending of traps for port security address violations and set the number of traps per second to 3. Switch# configure terminal Switch(config)# snmp-server enable traps port-security Switch(config)# snmp-server enable traps port-security trap-rate 3 Switch(config)# 89-4 switchport port-security This command is used to configure the port security settings to restrict the number of users that are allowed to gain access rights to a port. Use the no form of this command to disable port security or to delete a secure MAC address. switchport port-security [maximum VALUE | violation {protect | restrict | shutdown} | mode {permanent | delete-on-timeout} | mac-address [permanent] MAC-ADDRESS [vlan VLAN-ID]] no switchport port-security [maximum | violation | mode | mac-address [permanent] MAC-ADDRESS [vlan VLAN-ID]] Parameters maximum VALUE protect restrict shutdown permanent (Optional) Specifies to set the maximum number of secure MAC addresses allowed. If not specified, the default value is 32. The valid range is from 0 to 12288. (Optional) Specifies to drop all packets from the insecure hosts at the port-security process level, but does not increment the security-violation count. (Optional) Specifies to drop all packets from the insecure hosts at the port-security process level and increments the security-violation count and record the system log. (Optional) Specifies to shut down the port if there is a security violation and record the system log. (Optional) Specifies that under this mode, all learned MAC addresses will not be purged out unless the user manually deletes those entries. 1173