D-Link DGS-3630 Emulator 1 - Page 12

Keystroke Delete Backspace Left Arrow Right Arrow CTRL+R Return Space ESC DGS-3630 Layer 3 Stackable Managed Switch CLI Reference Guide Description Deletes the character under the cursor and shifts the remainder of the line to the left. Deletes the character to the left of the cursor and shifts the remainder of the line to the left. Moves the cursor to the left. Moves the cursor to the right. Toggles the insert text function on and off. When on, text can be inserted in the line and the remainder of the text will be shifted to the right. When off, text can be inserted in the line and old text will automatically be replaced with the new text. Scrolls down to display the next line or used to issue a command. Scrolls down to display the next page. Escapes from the displaying page. Display Result Output Modifiers Results displayed by show commands can be filtered using the following parameters: • begin FILTER-STRING - This parameter is used to start the display with the first line that matches the filter string. • include FILTER-STRING - This parameter is used to display all the lines that match the filter string. • exclude FILTER-STRING - This parameter is used to exclude the lines that match the filter string from the display. The example below shows how to use the begin FILTER-STRING parameter in a show command. Switch#show running-config | begin interface ethernet 1/0/27 interface ethernet 1/0/27 ! interface ethernet 1/0/28 ! interface Vlan1 ! interface Null0 ! ntp access-group default nomodify noquery ! ! end Switch# The example below shows how to use the include FILTER-STRING parameter in a show command. Switch#show running-config | include line line console line telnet line ssh Switch# 7