D-Link DGS-3630 Emulator 1 - Page 8

DGS-3630 Layer 3 Stackable Managed Switch CLI Reference Guide • Users with advanced user, power-user, operator or administrator level accounts will log into the Switch in the Privileged EXEC Mode. Therefore, the User EXEC Mode can operate at a basic user level and the Privileged EXEC Mode can operate at the advanced user, power-user, operator, or administrator levels. The user can only enter the Global Configuration Mode from the Privileged EXEC Mode. The Global Configuration Mode can be accessed by users who have operator or administrator level user accounts. As for sub-configuration modes, a subset of those can only be accessed by users who have the highest secure administrator level privileges. The following table briefly lists the available command modes. Only the basic command modes and some of the sub-configuration modes are enumerated. The basic command modes and basic sub-configuration modes are further described in the following chapters. Descriptions for the rest of the sub-configuration modes are not provided in this section. For more information on the additional sub-configuration modes, the user should refer to the chapters relating to these functions. The available command modes and privilege levels are described below: Command Mode/ Privilege Level Purpose User EXEC Mode / Basic User level This level has the lowest priority of the user accounts. It is provided only to check basic system settings. Privileged EXEC Mode / Operator level For changing local and global terminal settings, monitoring, and performing certain system administration tasks. Except for security related information, this level can perform system administration tasks. Privileged EXEC Mode / Administrator level This level is identical to privileged EXEC mode at the operator level, except that a user at the administrator level can monitor and clear security related settings. Global Configuration Mode / Operator level For applying global settings, except for security related settings, on the entire switch. In addition to applying global settings on the entire switch, the user can access other sub-configuration modes from global configuration mode. Global Configuration Mode / Administrator level For applying global settings on the entire switch. In addition to applying global settings on the entire switch, the user can access other sub-configuration modes from global configuration mode. Interface Configuration Mode For applying interface related settings. / Administrator level User EXEC Mode at Basic User Level This command mode is mainly designed for checking basic system settings. This command mode can be entered by logging in as a basic user. Privileged EXEC Mode at Advanced User Level This command mode is mainly designed for checking basic system settings, allowing users to change the local terminal session settings and carrying out basic network connectivity verification. One limitation of this command mode is that it cannot be used to display information related to security. This command mode can be entered by logging in as an advanced user. Privileged EXEC Mode at Power User Level Users logged into the Switch in privileged EXEC mode at this level can execute fewer commands than operators, including the 'config' commands other than the operator level and administrator level commands. The method to 3