D-Link DGS-3630 Emulator 1 - Page 211

DGS-3630 Layer 3 Stackable Managed Switch CLI Reference Guide Example This example shows how to set the distance of external routes and internal routes in to 50, 100, respectively. Switch# configure terminal Switch(config)# router bgp 65100 Switch(config-router)# distance bgp 50 100 Switch(config-router)# 13-37 ip as-path access-list (MI and EI Mode Only) This command is used to define a rule entry for a BGP Autonomous System (AS) path access list. Use the no form of this command to remove the definition of an AS path access-list. ip as-path access-list ACCESS-LIST-NAME [{permit | deny} REGEXP] no ip as-path access-list ACCESS-LIST-NAME Parameters ACCESS-LIST-NAME permit deny REGEXP Specifies the name of an AS path access list. The maximum length is 16 bytes Specifies that routes that match the rule entry are permitted. Specifies that routes that match the rule entry are denied. Specifies a regular expression for the matching pattern. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to define an AS path access list entry. An AS path access list can contain multiple rule entries, either as a deny entry or a permit entry. Use the neighbor filter-list command to apply an AS path access list to a neighbor session as an ingress filter or an egress filter. If an access list is applied and the route matches an access list entry, no further check will be done against other rules. If the match rule is a permit rule, the route is permitted. If the matched rule is a deny rule, the route is denied. Use the match as-path command to match an access list in a route map entry definition. To match a route map entry, all match statements must be satisfied. To match an AS path access list, if an entry in the access list matches the route, no further check will be done against the remaining entries in the access list. If the matched entry is a permit entry, the AS path access list is matched. If the matched entry is a deny entry, the AS path access list is not matched. If none of the rule entries in the AS path access list match the route, the AS path access list is not matched. 206