D-Link DIR-505 Manual - Page 113
This will allow you to change the local network settings of the access point and to configure
View all D-Link DIR-505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Section 3 - Configuration LAN Setup This section will allow you to change the local network settings of the access point and to configure the DHCP settings. Device Name: Enter the Device Name of the AP. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. LAN Connection Use the drop-down menu to select Dynamic IP (DHCP) Type: to automatically obtain an IP address on the LAN/private network. IP Address: Enter the IP address of the access point. The default IP address is 192.168.0.50. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the Subnet Mask assigned by your ISP. Gateway Enter the Gateway assigned by your ISP. Address: D-Link DIR-505 User Manual 107